ตัวกรองผลการค้นหา
Chief of Joint Staff
แปลว่าเสนาธิการทหาร
Nose Out Of Joint
ball and socket joint
แปลว่าข้อต่อที่ใช้ลูกลื่นกลมรองรับอยู่ในเบ้า
put someone's nose out of joint
แปลว่าทำให้รำคาญ, ทำให้ (บางคน) เสียแผน
stunt end, form stop end, say joint
แปลว่ารอยหยุดตั้งฉากในการเทคอนกรีต
stunt end, form stop, stop end, say joint
joint connecting the two shells of a pearl oyster
แปลว่าขื่อมุก
groyne
แปลว่ารอ : อาคารที่สร้างยื่นออกจากตลิ่งหรือบางส่วนของลำน้ทำ ในลักษณะทำมุมกับทิศทางของ กระแสน้ำ เรียกอีกอย่างว่า groin, spur dike หรือ transverse dike, jetty
Baked Strength
แปลว่า(english) Compressive, shear, tensile or transverse strength of a mold sand mixture when baked at a temperature above 231 B0F (111 B0C) and then cooled to room temperature.
Bearing Strength
แปลว่า(english) The maximum bearing load at failure divided by the effective bearing area. In a pinned or riveted joint, the iffective area is calculated as the product of the diameter of the hole and the thickness of the bearing member.
Pumping (of Pavements)
แปลว่า(Concrete Engineering) The ejection of a mixture of water and solid materials such as clay or silt along cracks, transverse or longitudinal joints, and along pavement edges caused by downward slab movement due to the passage of heavy loads, machinery or equipment over the pavement after free water has accumulated in or on the subbase, subgrade or basecourse.
Bent Axis Pumps
แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.
