ตัวกรองผลการค้นหา
A.G.C. Systems
แปลว่า(Automatic Gauge Control) Hydraulic or electric system that supplies the force to the A.G.C. roll force cylinders.
Bright Basic Wire
แปลว่า(english) Bright steel wire, slightly softer than Bright Bessemer Wire. Used for round head wood screws, bolts and rivets, electric welded chain, etc.
meter
แปลว่า(วิศว) หน่วยวัดความยาวเป็นเมตร; เครื่องวัด เช่น water meter = เครื่องวัดจำนวนน้ำ, หม้อมีเต้อรวัดน้ำ; electric meter = หม้อมีเต้อรวัดกระแสไฟฟ้า ฯลฯ
Addition Agent
แปลว่า(english) 1) Any material added to a charge of molten metal in bath or ladle to bring alloy to specifications, 2) reagent added to plating bath.
gearbox
แปลว่าเกียร์รถ, เครื่องเปลี่ยนความเร็วของเครื่องยนต์ ที่เรียกกันทั่วๆ ไปว่า เกียร์ (ความหมายอย่างเดียวกับคำว่า change speed gear หรือ charge speed gear ซึ่งแปลว่า เครื่องถ่ายกำลังมาเป็นความเร็ว) กระปุกเฟืองเกียรร์)
ADAPTER
แปลว่า(english) A mechanical device used to align the shaft of an electric motor (or other rotary device) with the shaft of a hydraulic pump to maintain radial and parallel shaft alignment.
Acid Process 1
แปลว่า(english) A process of making steel, either Bessemer, open-hearth or electric, in which the furnace is lined with a siliceous refractory and for which low phosphorus pig iron is required as this element is not removed.
Acid-Process
Box Annealing 2
แปลว่า(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.
Box Annealing
แปลว่า(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.
Agglomerating Processes
แปลว่า(english) "Fine particles of limestone (flux) and iron ore are difficult to handle and transport because of dusting and decomposition, so the powdery material usually is processed into larger pieces. The raw material's properties determine the technique that is used by mills. 1) SINTER Baked particles that stick together in roughly one-inch chunks. Normally used for iron ore dust collected from the blast furnaces. 2) PELLETS Iron ore or limestone particles are rolled into little balls in a balling drum and hardened by heat. 3) BRIQUETTES Small lumps are formed by pressing material together. Hot Iron Briquetting (HBI) is a concentrated iron ore substitute for scrap for use in electric furnaces.
Basic Oxygen Furnace (BOF)
แปลว่า(english) "WHAT A pear-shaped furnace, lined with refractory bricks, that refines molten iron from the blast furnace and scrap into steel. Up to 30% of the charge into the BOF can be scrap, with hot metal accounting for the rest. WHY BOFs, which can refine a heat (batch) of steel in less than 45 minutes, replaced open-hearth furnaces in the 1950s; the latter required five to six hours to process the metal. The BOF's rapid operation, lower cost and ease of control give it a distinct advantage over previous methods. HOW Scrap is dumped into the furnace vessel, followed by the hot metal from the blast furnace. A lance is lowered from above, through which blows a high-pressure stream of oxygen to cause chemical reactions that separate impurities as fumes or slag. Once refined, the liquid steel and slag are poured into separate containers. "
