ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 387 รายการ

Bridle Snubber

แปลว่า(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brittle:

แปลว่า(english) A brittle structure or material exhibits low ductility, meaning that it exhibits very little inelastic deformation before complete failure.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Degree of Freedom:

แปลว่า(english) A displacement quantity which defines the shape and location of an object. In the two dimensional plane, a rigid object has three degrees of freedom: two translations and one rotation. In three dimensional space, a rigid object has six degrees of freedom (three translations and three rotations).
 ศัพท์ช่างภาษาอังกฤษ – ไทย

BREATHER

แปลว่า(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brass

แปลว่า(english) An alloy that is 70% copper,30% zinc. One of the most widely used of the copper-zinc alloys; malleable and ductile; excellent cold-working but poor hot-working and machining properties; excellent for soft-soldering; good for silver alloy brazing or oxyacetylene welding, but fair for resistance or carbon-arc welding. Used for drawn cartridges, tubes, eyelets machine items and snap fasteners.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Boron (chemical symbol B)

แปลว่า(english) Element N. 5 of the periodic system. Atomic weight 10.82. It is gray in color, ignites at about 1112 (degrees) F. and burns with a brilliant green flame, but its melting point in a non-oxidizing atmosphere is about 4000 (degrees) F. Boron is used in steel in minute quantities for one purpose only- to increase the hardenability as in case hardening and to increase strength and hardness penetration.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blank 2

แปลว่า(english) A piece of stock (also call a “slug” or “multiple”) from which a forging is to be made.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Bull Gear

แปลว่า(english) The large crank gear of a shaper.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blow Back

แปลว่า(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Bending

แปลว่า(english) A preliminary forging operation to give the piece approximately the correct shape for subsequent forming.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

BI

แปลว่า(english) Chemical symbol for Bismuth
 ศัพท์ช่างภาษาอังกฤษ – ไทย