ตัวกรองผลการค้นหา
Inform
กริยาช่อง 2Informed
กริยาช่อง 3Informed
แปลว่าแจ้ง, บอก, แถลง
Preform
กริยาช่อง 2Preformed
กริยาช่อง 3Preformed
แปลว่าปฏิบัติ, แสดง, กระทำ
Resources
แปลว่า(Software Engineering) anything that is required to get the project done, people, hardware, materials, information, etc.
formative
แปลว่าเป็นการก่อสร้าง, ทำให้เป็นรูปขึ้น
Linear:
แปลว่า(english) A structure is said to behave linearly when its the deformation response is directly proportional to the loading (i.e. doubling the load doubles the displacement response). For a material, linear means that the stress is directly proportional to the strain.
travelling form
แปลว่าแบบหล่อคอนกรีตแบบเคลื่อนตัวได้ (ติดตั้งบนล้อ)
Plastic Consistency
แปลว่า(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.
Acid Brittleness (Pickling Brittleness)
แปลว่า(english) Brittleness resulting from pickling steel in acid; hydrogen, formed by the interaction between iron and acid, is partially absorbed by the metal, causing acid brittleness.
Ductility:
แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.
Peeling
แปลว่า(Concrete Engineering) A process in which thin flakes of matrix or mortar are broken away from concrete surface; caused by adherence of surface mortar-to forms as forms are removed, or to trowel or float in portland cement plaster.
Strength:
แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.
Batch Anneal
แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.
