ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 126 รายการ

Brite

แปลว่า(english) 1) Regular galvanize coating (not minimized spangle or JP). 2) Rolls that have no grit; smooth finish on surface of steel.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Burnt Rubber

แปลว่า(english) Small or large black spots that generally show up on surface and are generally caused by pickling steel too hot.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Backer (back-up plate)

แปลว่า(english) A “tool” or reinforcing part, which presses against the outer surface of an extrusion die, supporting it against the pressure of the extruding metal. The backer has an opening larger than the die aperture, allowing the extruded product to emerge without marring its soft surface.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Rebound

แปลว่า(Concrete Engineering) Wet shotcrete or sand and cement which bounces away from a surface again at which pneumatically applied mortar is being projected.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Abrasive Wear

แปลว่า(english) The displacement and / or detachment of metallic particles from a surface as a consequence of being exposed to flowing fluids or gases.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Distributed load:

แปลว่า(english) An external force which acts over a region of length, surface, or area: essentially any external force which is not a concentrated force.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Condensation

แปลว่า(Concrete Engineering) When a moisture laden gas comes in contact with a cooler surface a change of state from gaseous to liquid occurs.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Biofilm

แปลว่า(Environmental Engineering) A film of microorganisms attached to a surface, such as that on a trickling filter, rotating biological contactor, or rocks in natural streams.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Bonderizing

แปลว่า(english) The coating of steel with a film composed largely of zinc phosphate in order to develop a better bonding surface for paint or lacquer.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Broach

แปลว่า(english) A long, tapered cutting tool with serrations which,when forced through a hole or across a surface, cuts a desired shape or size.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Bevel

แปลว่า(english) Angle formed between the prepared edge of the end of tube and a plane perpendicular to the surface. Standard pipe bevel is 30 degrees.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brinell Hardness Test

แปลว่า(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.
 ศัพท์ช่างภาษาอังกฤษ – ไทย